Principle Introduction:
MIX8020N Formaldehyde /CH2O gas sensor is a battery operable electrochemical formaldehyde sensor developed by Mixsen. Formaldehyde and oxygen on the working electrode and counter electrode are subjected to oxidation-reduction reaction correspondingly. This produces the electric current. The current is directly proportional to the concentration of formaldehyde and following the Faraday’s law. Through measure the current to get the concentration of formaldehyde.
Feature:
Small size
High selectivity
High accuracy
Linear output
Long life
Application:
Residential and commercial detectors
Houseboat and moto home
Air purifier
Ventilation control
Smart home
Technical Parameters :
Item | Specification |
Target Gas | Formaldehyde |
Measurement Range | 0 ~ 2 ppm |
Maximum Overload | 5 ppm |
Sensitivity | 0.25-0.60 μA/ppm |
Resolution | ≤0.02 ppm |
Response Time(T90) | < 60 seconds |
Recommended Load Resistor | 200Ω |
Repeatability | < 2% output value |
Output Linearity | Linear |
Drift in Air(-20℃~40℃) | ≤0.2ppm |
Anticipated Using Life | 2 years(in air) |
Operating Temperature Range | -20 ~ 50˚C |
Operating Humidity Range | 15 ~ 90% RH |
Operating Pressure Range | 0.1mpa±10% |
Note: All measurements were taken at 20˚C, 50%RH at 1013hPa |