MIX8020N Industrial 0 ~ 5 ppm Electrochemical Formaldehyde Sensor/CH2O Monitoring sensor
Principle Introduction:
MIX8020N Formaldehyde /CH2O gas sensor is a battery operable electrochemical formaldehyde sensor developed by Mixsen. Formaldehyde and oxygen on the working electrode and counter electrode are subjected to oxidation-reduction reaction correspondingly. This produces the electric current. The current is directly proportional to the concentration of formaldehyde and following the Faraday’s law. Through measure the current to get the concentration of formaldehyde.
Feature:
Small size ,High selectivity ,High accuracy ,Linear output ,Long life
Application:
Residential and commercial detectors ,Houseboat and moto home ,Air purifier ,Ventilation control ,Smart home
Technical Parameters :
Item | Specification |
Target Gas | Formaldehyde |
Measurement Range | 0 ~ 5 ppm |
Maximum Overload | 5 ppm |
Sensitivity | 0.25-0.60 μA/ppm |
Resolution | ≤0.02 ppm |
Response Time(T90) | < 60 seconds |
Recommended Load Resistor | 200Ω |
Repeatability | < 2% output value |
Output Linearity | Linear |
Drift in Air(-20℃~40℃) | ≤0.2ppm |
Anticipated Using Life | 2 years(in air) |
Operating Temperature Range | -20 ~ 50˚C |
Operating Humidity Range | 15 ~ 90% RH |
Operating Pressure Range | 0.1mpa±10% |
Note: All measurements were taken at 20˚C, 50%RH at 1013hPa |