0 ~ 5 Ppm Electrochemical Formaldehyde Sensor For Commercial Detectors
Electrochemical Formaldehyde Sensor Introduction:
MIX8020N Electrochemical Formaldehyde Sensor is for CH2O Gas Detector, is a general-purpose and miniaturization electrochemical formaldehyde detection sensor. It utilizes electrochemical principle to detect CH2O in air which makes the module with high selectivity and stability. It has the digital output and analog voltage output at the same time. It is a combination of mature electrochemical detection principle and sophisticated circuit design.
Electrochemical Formaldehyde Sensor Feature:
* Small size ,High selectivity ,High accuracy ,Linear output
* High sensitivity &resolution,
* Low power consumption, Long life
* Good stability, excellent ability of Anti-interference
Application of Electrochemical Formaldehyde Sensor :
Residential and commercial detectors
Air purifier ,Ventilation control ,Smart home
Portable detector, air-quality monitor, air cleaner, air renewal system, air conditioner
Technical Parameters of Electrochemical Formaldehyde Sensor :
Item | Specification |
Target Gas | Formaldehyde |
Measurement Range | 0 ~ 5 ppm |
Maximum Overload | 5 ppm |
Sensitivity | 0.25-0.60 μA/ppm |
Resolution | ≤0.02 ppm |
Response Time(T90) | < 60 seconds |
Recommended Load Resistor | 200Ω |
Repeatability | < 2% output value |
Output Linearity | Linear |
Drift in Air(-20℃~40℃) | ≤0.2ppm |
Anticipated Using Life | 2 years(in air) |
Operating Temperature Range | -20 ~ 50˚C |
Operating Humidity Range | 15 ~ 90% RH |
Operating Pressure Range | 0.1mpa±10% |
Note: All measurements were taken at 20˚C, 50%RH at 1013hPa |