Principle Introduction:
Carbon Monoxide ( Co ) gas sensor is electrochemical gas sensor,the concentration of the gas could be get by measuring value of current.We have different types of CO sensors, except the sensor, we also have modules and we can supply one-stop gas sensor solutions.The most hotsale type of co sensor is:MIX8012,MIX8011,MIX8015,etc.The life of the co sensor are 3 years,7years,8years,10years.So just tell us your detail need,we can meet your different needs and send you price asap.
Feature:
High selectivity and sensitivity to CO gas , High accuracy , Linear output ,Long life ,Environmental protection design
Application:
Residential and commercial ,Industrial monitors ,Indoor underground parking ,Houseboat and moto home ,Fire detection ,Ventilation control ,Domestic generator
Technical Parameters :
Item | Specification |
Target Gas | Carbon monoxide |
Measurement Range | 0 ~ 1000 ppm |
Maximum Overload | 2000 ppm |
Output Current | 1.5-3.5 nA/ppm |
Repeatability | ±2% |
Resolution | 0.5 ppm |
Response Time(T90) | < 60 S |
Long Term Output Drift | < 2% /month |
Lifetime | 10 years |
Operating Temperature Range | -20 ~ 50˚C |
Operating Humidity Range | 15 ~ 90% RH |
Operating Pressure Range | 0.1MPa±10% |
Recommended Load Resistor | 1kΩ |
Bias Voltage | Not required |
Note: All measurements were taken at 20˚C, 50%RH at 1013hPa |
Operating Note:
* When soldering the metal ribbons, the soldering tin was forbidden to contact with the sensor.
* Aging the sensor no less than 30 mins before operation.
* Keeping the sensor out of the volatile solvent.
* Prohibit storage and operating the sensor in acidic or alkaline
environment.