MIX2810 Carbon Monoxide(CO) is a generality electrochemical carbon monoxide detection module. It utilizes electrochemical principle to detect CO gas in air which makes the module with high selectivity and stability. Each module has UART, can be calibrated. It is easy to connect with the customer product.
Lower power consumption
Long life time
high resolution for co gas
Quick response time
Indoor Carbon Monoxide gas detection ,Smart home , Gas water Heater , Automatic fans, civilian area to detect CO gas concentration
Technical Parameters :
|Sensor||Electrochemistry CO gas sensor|
|Working Voltage||4.5~5.5V DC|
|Working Current||＜10mA average|
|Accuracy||±10 ppm(calibration concentration)|
|Preheating Time||30 Seconds|
|Inspection Interval||1 Second|
|Working Conditions||-10~55℃/0-90%RH(no condensation)|
|Storage Conditions||-10～55℃/0～90%RH(no condensation)|
|Communication Interface||UART (3.3V electrical level)|
|Anticipated Using Life||3 years|
* When soldering the metal ribbons, the soldering tin was forbidden to contact with the sensor.
* Aging the sensor no less than 30 mins before operation；
* Keeping the sensor out of the volatile solvent.
* Prohibit storage and operating the sensor in acidic or alkaline