Shenzhen Mixsen Electronics Co.,Ltd. 86-185-6625-9936
MIX2810 Electrochemical CO Gas Detection Module For Gas Water Heater

MIX2810 Electrochemical CO Gas Detection Module For Gas Water Heater

  • High Light

    Electrochemical CO Gas Detection Module


    MIX2810 CO Gas Detection Module


    MIX2810 carbon monoxide gas sensor

  • Principle
  • Range
  • Target Gas
    CO/Carbon Monoxide
  • Lifetime
    3 Years
  • Resolution
    1 Ppm
  • Preheating Time
    30 Seconds
  • Place of Origin
  • Brand Name
  • Model Number
  • Minimum Order Quantity
  • Packaging Details
    Inner packaging: foam cushion Outer packaging: carton
  • Delivery Time
    within 3 working days after payment
  • Supply Ability

MIX2810 Electrochemical CO Gas Detection Module For Gas Water Heater

MIX2810 electrochemical CO Gas Detection Module Used For gas Water Heater

Principle Introduction:


MIX2810 is a generality electrochemical carbon monoxide detection module. It utilizes electrochemical principle to detect CO gas in air which makes the module with high selectivity and stability. Each module has UART, can be calibrated. It is easy to connect with the customer product.




Lower power consumption 

Long life time
high resolution
Quick response time

High sensitivity

Multiple interfaces




Indoor Carbon Monoxide gas detection 

Smart home 

Gas water Heater 

Automatic fans

Civilian area to detect CO gas concentration


Technical Parameters :


Item Specification
Measurement range 0~500ppm
Resolution 1 ppm
Sensor Electrochemistry
Working Voltage 4.5~5.5V DC
Working Current <10mA average
Accuracy ±10 ppm(calibration concentration)
Preheating Time 30 Seconds
Response Time T90<30s
Inspection Interval 1 Second
Working Conditions -10~55℃/0-90%RH(no condensation)
Storage Conditions -10~55℃/0~90%RH(no condensation)
Communication Interface UART (3.3V electrical level)
Size 39×17×15.4mm(L×W×H)
Anticipated Using Life 3 years

Operating Note:


* When soldering the metal ribbons, the soldering tin was forbidden to contact with the sensor.
* Aging the sensor no less than 30 mins before operation;
* Keeping the sensor out of the volatile solvent.
* Prohibit storage and operating the sensor in acidic or alkaline