-
High Light
500ppm CO Gas Sensor
,500ppm Carbon Monoxide Sensor Module
,Electrochemical Carbon Monoxide Sensor Module
-
Response Time＜30 Second
-
Range0~500ppm
-
Target GasCO/Carbon Monoxide
-
Lifetime＞10 Years
-
Resolution1ppm
-
Size70×17×15.2mm(L×W×H)
-
Place of OriginZhengzhou,China
-
Brand NameMixsen
-
Model NumberMIX2811
-
Minimum Order Quantity1
-
Packaging DetailsInner packaging: foam cushion Outer packaging: carton
-
Delivery Timewithin 3 working days after payment
-
Supply Ability10,000/day
Electrochemical 0~500ppm CO Gas Sensor Carbon Monoxide Sensor Module
MIX2811 Electrochemical 0~500ppm Carbon Monoxide(CO) Gas Detection Sensor Module
Principle Introduction:
MIX2811 is a generality electrochemical carbon monoxide (CO) detection sensor module. electrochemical sensor detect indoor air quality co gas concentration by measuring current based on the electrochemical principle,to detect carbon monoxide in air which makes the module with high selectivity and stability. Each module has UART, can be calibrated. It is easy to connect with the customer product.
Feature:
High sensitivity
Multiple interfaces
Long life time
Integrated application is simple
Low power consumption
Quick response
High precision and stable performance
Application:
Indoor CO gas detection ,Smart home , Gas water Heater , Automatic fans
Technical Parameters :
| Item | Specification |
| Measurement Range | 0~500ppm |
| Resolution | 1ppm |
| Sensor | Electrochemistry |
| Working Voltage | 4.5~5.5V DC |
| Working Current | ＜1mA Average |
| Accuracy | ±50ppm(Calibration Value) |
| Preheating Time | 30 Seconds |
| Response Time | T90＜30 Second |
| Inspection Interval | 1 Second |
| Working Conditions | -10~55℃/0-90%RH(No Condensation) |
| Storage Conditions | -10～55℃/0～90%RH(No Condensation) |
| Communication Interface | UART (3V Electrical Level) |
| Size | 70×17×15.2mm(L×W×H) |
| Anticipated Using Life | ＞10 years |
Operating Note:
* Please do not put the module in organic solvent (include silica gel and other cementing compound), painting,
medicament, oils and fuels, high concentration gas etc.
* The module is an ESD-sensitive module, so we recommend that ESD protection equipment be used
during usage and assembly the module in the application products.
* The accuracy in the data sheet is date before delivery. If with long term storage, after re-calibration, the
accuracy can be recovered.
* Keep the module out of the heat source, avoid direct sunlight and other heat radiations.
*Periodic calibration is necessary, no more than 6 months is recommend.
* Please warm up for 5 min before first using.
* Please do not use the module related with personal safety.
* Please do not install the module in the severe convection
environment.
* Please do not put in the module in high concentration organic gas
for long time
Our products are sold all over the world, you can rest assured.
