Principle Introduction:
MIX8419 Chlorine(CL2) Gas Detection Sensor is an electrochemical Cl2 sensor developed by Mixsen. It uses the principle of electrochemistry. There is a reference electrode inside the sensor, which greatly improves the stability of the sensors. When the sensor senses the Chlorine, the working electrode and the counter electrode react with the redox reaction, through measure the current to get the concentration of chlorine gas.
Feature:
High selectivity for CL2 gas
High accuracy
Linear output
Environmental protection design
Application:
* Industrial CL2 gas monitors, leakage detection
* Portable and fixed cl2 gas detectors
Technical Parameters :
Item | Specification |
Target Gas | Chlorine/CL2 |
Measurement Range | 0~10 ppm |
Maximum Overload | 20 ppm |
Sensitivity | 0.40 ± 0.80 μA/ppm (negative siginal) |
Repeatability | ±2% |
Response Time(T90) | < 120 Seconds |
Resolution | 0.5 ppm |
Long Term Output drift | <2% per year |
Life Expectancy(in air) | 2 Years |
Operating Temperature Range | -20 ~ 50˚C / 15~90% RH |
Operation Press | 0.1MPa±10% |
Bias Voltage | Not required |
Note: All measurements were taken at 20˚C, 50%RH at 1013hPa |