MIX8030 Electrochemical Alcohol Gas Detection Sensor For Alcohol Testing For Traffic Safety
Principle Introduction:
MIX8030 Alcohol detection Sensor is an electrochemical sensor developed by Mixsen. Alcohol and oxygen on the working electrode and counter electrode are subjected to oxidation-reduction reaction correspondingly. This produces the electric current. The current is directly proportional to the concentration of alcohol and following the Faraday’s law. Through measure the current to get the concentration of alcohol gas .
Feature:
Small size
High accuracy for C2H5OH
High sensitivity for alcohol
Linear output
Long life
Application:
Residential and commercial , Alcohol testing for traffic safety , Alcohol testing before works , Coin-operated alcohol detector
Technical Parameters :
Item | Specification |
Target Gas | Alcohol(C2H5OH) |
Measurement Range | (0~1.0) mg/L |
Maximum Overload | 2.0 mg/L |
Sensitivity | (6±2)µA/(mg/L) |
Response Time(T90) | ≤20 Seconds |
Recommended Load Resistor | 10Ω |
Repeatability | ±0.006mg/L |
Stability | <2﹪/month |
Output Linearity | Linear |
Drift in Air(-20℃~40℃) | -0.01mV~0.01mV |
Lifetime | 2 years |
Operating Temperature Range | -20 ~ 50˚c |
Storage Temperature Range | 0~20℃ |
Operating Humidity Range | 15 ~ 90% RH |
Operating Pressure Range | 0.1MPa±10% |
Bias Voltage | Not required |
Note: All measurements were taken at 20˚C, 50%RH at 1013hPa |