MIX8412 Ozone(O3) Gas Monitor Sensor For Leakage Detection For Sterilization Equipment Electrochemical Type 0-10ppm
Principle Introduction:
MIX8412 Ozone Gas Sensor is an electrochemical type O3 sensor developed by Mixsen. It uses the principle of electrochemistry. There is a reference electrode inside the sensor, which greatly improves the stability of the sensors. When the sensor senses the ozone , the working electrode and the counter electrode react with the redox reaction, through measure the current to get the concentration of ozone gas.
Feature:
* High selectivity & sensitivity to O3
* High accuracy
* Linear output
* Environmental protection design
Application:
* Industrial monitors
* Portable/Fixed gas detector
* Leakage detection for sterilization equipment
* Widely suitable for the detection of O3 in industry and environmental protection
Technical Parameters :
Item | Specification |
Target Gas | O3/Ozone |
Measurement Range | 0~10 ppm |
Resolution | 0.1 ppm |
Output voltage in air | 3 ~ 0.3 V |
Response Time(T90) | ≤120 |
Operating Press | 0.1MPa ±10% |
Maximum Overload | 20 ppm |
Sensitivity | 0.40~0.80ųA/ppm(negative signal) |
Repeatability | ± 2% |
LongTerm Output Drift | <2% /month |
Operationg Temp.&Hum | -20~50℃ /15~90%RH |
Life Expectancy | 2 years(in air) |