Shenzhen Mixsen Electronics Co.,Ltd. 86-185-6625-9936 sales@mixsen.com
MIX1017 Semiconductor Ammonia(NH3) Gas Detection Sensor 5~500ppm For Portable And Fixed Gas Detector

MIX1017 Semiconductor Ammonia(NH3) Gas Detection Sensor 5~500ppm For Portable And Fixed Gas Detector

  • High Light

    5ppm semiconductor gas detector

    ,

    NH3 semiconductor gas detector

    ,

    5ppm nh3 gas sensor

  • Target Gas
    Ammonia/NH3
  • Range
    5-500ppm
  • Life
    5 Years
  • Type
    Semiconductor
  • Power Consumption
    ≤450mW
  • Material
    In Dioxide SnO2
  • Place of Origin
    Zhengzhou,China
  • Brand Name
    Mixsen
  • Model Number
    MIX1017
  • Minimum Order Quantity
    1
  • Packaging Details
    Inner packaging: foam cushion Outer packaging: carton
  • Delivery Time
    within 3 working days after payment
  • Supply Ability
    10,000/day

MIX1017 Semiconductor Ammonia(NH3) Gas Detection Sensor 5~500ppm For Portable And Fixed Gas Detector

MIX1017 Semiconductor Ammonia(NH3) Gas Detection Sensor 5~500ppm For Portable And Fixed Gas Detector

Principle Introduction:

 

The sensing material of MIX1017 is tin dioxide SnO2, which has low conductivity in clean air. When the Ammonia gas exists, the conductivity of the sensor will be raise according to the gas concentration goes up. Through a simple circuit, to convert the changes of conductivity to correspond to the ammonia gas concentration.

MIX1017 Ammonia(NH3) Gas Detection Sensor has high sensitivity to ammonia. The gas sensor can work in high temperature. It is low cost sensor and can be used in different applications.

 

Feature:


High sensitivity for NH3
Low power consumption
Long life and low cost
Fast response and recovery

 

Application:

 

* Domestic gas leakage detectors
* Portable gas detectors

* Civil ammonia alarm
* Portable ammonia alarm
* Vehicle Exhaust Monitoring

 

Technical Parameters :

 

Item Specification
Detecting Range 5~500ppm(NH3)
Target Gas Ammonia/NH3
Heater Voltage(VH) 5.0V±0.1V AC or DC
Loop Voltage ≤24V DC
Heater Resistor(RH) 55Ω±3Ω(Room Temp.)
Power consumption(PH) ≤450mW
Sensitivity RS(in air)/RS(50ppm NH3)≥ 3
Output Voltage(Vs) ≥0.5 V(In 50ppm NH3)
Concentration Slope ≤0.6 (R200ppm/R50ppm NH3)
Testing condition 20±2℃, 65%±5%RH
Oxygen concentration in used place 21%, no less than 18% If used in low oxygen concentration, pleasure contact for detail Life Expectancy 5 years