MIX1035 Air Quality Pollution (TVOC ) Detection Sensor For Hydrogen, Smoke, Alcohol Gas Monitoring
Principle Introduction:
The sensing material of MIX1035 TVOC Sensor is tin dioxide SnO2, which has low conductivity in clean air. When the contaminants gases exists, the conductivity of the sensor will be raise according to the gas concentration goes up. Through a simple circuit, to convert the changes of conductivity to correspond to the gas concentration.
MIX1035 TVOC air quality pollution Sensor has high sensitivity to hydrogen, smoke, carbon monoxide etc. The air quality sensor can work in high temperature. It is low cost sensor and can be used in different applications.
Feature:
High sensitivity to gases air contaminants
Long life
Low cost
High anti-seismic
Simple application circuit
Application:
Air purifier
Air quality monitors
HAVC system
Air pollution testing for household use and industrial use
Technical Parameters :
Item | Specification |
Target Gas | Hydrogen, smoke, alcohol, etc |
Typical Measurement Range | 10~1000ppm( toluene, smoke, alcohol, etc) |
Heater Voltage(Vh) | 5.0V±0.1V AC or DC |
Loop Voltage | ≤24V DC |
Heater Resistance(Rh) | 29Ω±3Ω(Room temperature) |
Heater Power Consumption(Ph) | ≤950mW |
Sensitivity | Rs(in air)/Rs(400ppm H2)≥ 5 |
Output In Target Gas | 2.0~4.0V(in 400ppm H2) |
Concentration Slope | ≤0.6 (R300ppm/R50ppm alcohol) |
Testing Condition | 20℃±2℃;55%±5%RH |
Oxygen concentration in used place | 21%, no less than 18% |
If used in low oxygen concentration, pleasure contact for detail | |
Life Expectancy | 10 years |