Principle Introduction:
The sensing material of MIX1012 Smoke Detection Sensor is tin dioxide SnO2, which has low conductivity in clean air. When the Smoke gas exists, the conductivity of the sensor will be raise according to the gas concentration goes up. Through a simple circuit, to convert the changes of conductivity to correspond to the gas concentration.
Feature:
* high sensitivity
* Stable performance
* Small size
* Good seismic performance
* Good adaptability to high and low temperature
* Long life
Application:
Smoke detector
Portable gas detectors for C3H8
Smoke monitor/alarm
Technical Parameters :
Item | Specification |
Target Gas | C3H8, smoke |
Measurement Range | 200~10000ppm(C3H8 gas) |
Heater Voltage(Vh) | 5V±0.1V AC or DC |
Loop Voltage | ≤24V DC |
Load Resistance | Adjustable |
Heater Resistance(Rh) | 65Ω±5Ω(Room temperature) |
Heater Power Consumption(Ph) | ≤350mW |
Sensitivity | Rs(in air)/Rs(2000ppm C3H8)≥ 5 |
Output In Target Gas | 2.5~4V(in 2000ppm C3H8) |
Testing Condition | 20℃±2℃;65%±5%RH |
Concentration Slope | ≤0.6(R3000PPM/R500PPM C3H8) |
Oxygen concentration in used place | 21%, no less than 18%,If used in low oxygen concentration, pleasure contact for detail |
Life Expectancy | 10 years |