Principle Introduction:
The sensing material of MIX1013 Alcohol Sensor is tin dioxide SnO2, which has low conductivity in clean air. When the alcohol gas exists, the conductivity of the sensor will be raise according to the gas concentration goes up. Through a simple circuit, to convert the changes of conductivity to correspond to the gas concentration.
Feature:
* High sensitivity to wide range of alcohol
* High sensitivity to alcohol
* Long life and low cost
* High ant seismic
Application:
Personal usage alcohol meter breathalyzer
Commercial usage alcohol meter breathalyzer
Other usage alcohol detectors
Technical Parameters :
Item | Specification |
Target Gas | Alcohol |
Detecting Range | 0~500ppm |
Load Resistance | Adjustment |
Heater Voltage(VH) | 5V±0.1V AC or DC |
Loop Voltage | ≤24V DC |
Heater Resistor(RH) | 55Ω±5Ω(Room Temp.) |
Power consumption(PH) | ≤450mW |
Sensitivity | RS(in air)/RS(30000ppm alcohol)≥ 5 |
Output Voltage(Vs) | 1.0V ~3.5V(In 30000ppm alcohol) |
Concentration Slope | ≤0.6 (R300ppm/R50ppm alcohol) |
Testing condition | 22±2℃, 55%±5%RH |
Life Expectancy | 10 years |