Principle Introduction:
The sensing material of MIX1014 is tin dioxide SnO2, which has low conductivity in clean air. When the combustible gas exists, the conductivity of the sensor will be raise according to the gas concentration goes up. Through a simple circuit, to convert the changes of conductivity to correspond to the gas concentration.
MIX1014 Combustible (CH4) Gas Sensor has high sensitivity to methane, propane butane etc. combustible gas. The sensor can work in high temperature. It is low cost sensor and can be used in different applications.
Feature:
* High sensitivity to methane
* Low power consumption
* Long life and low cost
* Fast response and recovery
Application:
* Domestic gas leakage detectors
* Portable gas detectors
Technical Parameters :
Item | Specification |
Target Gas | Methane /CH4 |
Measurement Range | 300~10000ppm(CH4) |
Heater Voltage(Vh) | 5V±0.1V AC or DC |
Loop Voltage | ≤24V DC |
Heater Resistance(Rh) | 29Ω±3Ω(Room temperature) |
Heater Power Consumption(Ph) | ≤950mW |
Sensitivity | Rs(in air)/Rs(5000ppm CH4)≥ 5 |
Concentration Slope(α) | ≤0.6(R5000ppm/R1000ppm CH4) |
Output In Target Gas | 2.5~4V(in 5000ppm CH4) |
Testing Condition | 20℃±2℃;55%±5%RH |
Oxygen concentration in used place | 21%, no less than 18%,If used in low oxygen concentration, pleasure contact for detail |
Life Expectancy | 10 years |