MIX8015 Carbon Monoxide(CO) Gas Sensor is a battery operable electrochemical carbon monoxide sensor developed by Mixsen. Carbon monoxide and oxygen on the working electrode and counter electrode are subjected to oxidation-reduction reaction correspondingly. This produces the electric current. The current is directly proportional to the concentration of carbon monoxide and following the Faraday’s law. Through measure the current to get the concentration of carbon monoxide.
High selectivity and sensitivity to CO ,High accuracy ,Linear output ,Long life ,Environmental protection design
Residential and commercial ,Industrial monitors ,Indoor underground parking ,Houseboat and moto home ,Fire detection ,Ventilation control ,Domestic generator
Technical Parameters :
|Target Gas||Carbon monoxide|
|Measurement Range||0 ~ 1000 ppm|
|Maximum Overload||2000 ppm|
|Output Current||1.5-3.5 nA/ppm|
|Response Time(T90)||< 60 seconds|
|Long Term Output Drift||< 2% /month|
|Operating Temperature Range||-20 ~ 50˚c|
|Operating Humidity Range||15 ~ 90% RH|
|Operating Pressure Range||0.1mpa±10%|
|Recommended Load Resistor||1kΩ|
|Bias Voltage||Not required|
* When soldering the metal ribbons, the soldering tin was forbidden to contact with the sensor.
* Aging the sensor no less than 30 mins before operation；
* Keeping the sensor out of the volatile solvent.
* Prohibit storage and operating the sensor in acidic or alkaline