MIX1016 Hydrogen Sulfide(H2S) Gas Detection Sensor
Principle Introduction:
The sensing material of MIX1016 is tin dioxide SnO2, which has low conductivity in clean air. When the Hydrogen Sulfide gas exists, the conductivity of the sensor will be raise according to the gas concentration goes up. Through a simple circuit, to convert the changes of conductivity to correspond to the gas concentration.
MIX1016 Hydrogen Sulfide(H2S) Gas Sensor has high sensitivity to Hydrogen Sulfide. The sensor can work in high temperature. It is low cost sensor and can be used in different applications.
Feature:
High sensitivity
Low power consumption
Long life and low cost
Fast response and recovery
Application:
Domestic H2S gas leakage detectors
Portable H2S gas detectors
Item | Specification |
Target Gas | Hydrogen Sulfide |
Measurement Range | 0~50ppm(H2S) |
Heater Voltage(Vh) | 5.0V±0.1V AC or DC |
Loop Voltage | ≤24V DC |
Heater Resistance(Rh) | 55Ω±3Ω(Room temperature) |
Heater Power Consumption(Ph) | ≤300mW |
Sensitivity | RS(in air)/RS(1000ppm H2S)≥ 5 |
Concentration Slope(α) | ≤0.6(R1000ppm/R20ppm H2S) |
Output In Target Gas | ≥5V(in 50ppm H2S) |
Testing Condition | 20℃±2℃;65%±5%RH |
Oxygen concentration in used place | 21%, no less than 18% |
If used in low oxygen concentration, pleasure contact for detail | |
Life Expectancy | 5 years |