MIX8412 Electrochemical 0-10ppm Ozone(O3) Gas monitor Sensor for Ozone Concentration
Principle Introduction:
MIX8412 Ozone Gas Sensor is an electrochemical O3 sensor developed by Mixsen. It uses the principle of electrochemistry. There is a reference electrode inside the sensor, which greatly improves the stability of the sensors. When the sensor senses the ozone, the working electrode and the counter electrode react with the redox reaction, through measure the current to get the concentration of ozone.
Feature:
*High selectivity & sensitivity to O3
*High accuracy
*Linear output
*Environmental protection design
Application:
* Industrial monitors
* Leakage detection for sterilization equipment
* Widely suitable for the detection of O3 in industry and environmental protection
Technical Parameters :
Item | Specification |
Target Gas | O3/Ozone |
Measurement Range | 0~10 ppm |
Resolution | 0.1 ppm |
Output voltage in air | 3 ~ 0.3 V |
Response Time(T90) | ≤120 |
Operating Press | 0.1MPa ±10% |
Maximum Overload | 20 ppm |
Sensitivity | 0.40~0.80ųA/ppm(negative signal) |
Repeatability | ± 2% |
LongTerm Output Drift | <2% /month |
Operationg Temp.&Hum | -20~50℃ /15~90%RH |
Life Expectancy | 2 years(in air) |