0 ~ 1000ppm Electrochemical Carbon Monoxide Gas Sensor / CO Gas Sensor For Indoor Underground Garage CO Gas Detection
Principle Introduction:
MIX8010 Carbon Monoxide(CO) Gas Sensor is a battery operable electrochemical carbon monoxide(CO) gas sensor developed by Mixsen. Carbon monoxide and oxygen on the working electrode and counter electrode are subjected to oxidation-reduction reaction correspondingly. This produces the electric current. The current is directly proportional to the concentration of carbon monoxide and following the Faraday’s law. Through measure the current to get the concentration of carbon monoxide.
Feature:
Low power consumption
High precision and sensitivity
Wide linear range
Strong anti-interference ability
Excellent repeatability and stability
Environmental protection design
Application:
Residential and commercial usage
Industrial CO gas leak monitors
Indoor underground parking
Houseboat and moto home
Fire detection
Ventilation control
Domestic generator
Portable and Fixed Gas detector
Technical Parameters :
Item | Specification |
Target Gas | Carbon monoxide/CO gas |
Measurement Range | 0 ~ 1000 ppm |
Maximum Overload | 2000 ppm |
Output Current | 1.5-3.5 nA/ppm |
Repeatability | ±2% |
Resolution | 0.5 ppm |
Response Time(T90) | < 60 Seconds |
Long Term Output Drift | < 2% /month |
Lifetime | 3 Years |
Operating Temperature Range | -20 ~ 50˚C |
Operating Humidity Range | 15 ~ 90% RH |
Operating Pressure Range | 0.1MPa±10% |
Recommended Load Resistor | 1kΩ |
Bias Voltage | Not required |