Principle Introduction:
MIX8421-SO2 electrochemical sensor detect gas concentration by measuring current based on the electrochemical principle, which utilizes the electrochemical oxidation process of target gas on the working electrode inside the electrolytic cell, the current produced in electrochemical reaction of the target gas are in direct proportion with its concentration while following Faraday law, then concentration of the gas could be get by measuring value of current.
Feature:
* High selectivity for SO2 gas
* High accuracy
* Linear output
* Environmental protection design
* Wide linear range
* Good anti-interference ability
* Excellent repeatability and stability
Application:
* Industrial SO2 gas monitors leakage detection
* industrial and environmental protection fields
Technical Parameters :
Item | Specification |
Target Gas | Sulphur Dioxide/SO2 |
Measurement Range | 0~20 ppm |
Maximum Overload | 100 ppm |
Sensitivity | 0.50 ± 0.15 μA/ppm (negative siginal) |
Repeatability | ±2% |
Response Time(T90) | < 45 Seconds |
Resolution | 0.2 ppm |
Long Term Output drift | <2% per month |
Life Expectancy(in air) | 2 Years |
Operating Temperature Range | -20 ~ 50˚C / 15~90% RH |
Operation Press | 0.1MPa ± 10% |
Bias Voltage | Not required |
Note: All measurements were taken at 20˚C, 50%RH at 1013hPa |