MIX8030 (0~1.0) Mg/L Electrochemical Alcohol Sensor For Alcohol Testing
Principle Introduction:
MIX8030 Alcohol Sensor is an electrochemical sensor developed by Mixsen. Alcohol and oxygen on the working electrode and counter electrode are subjected to oxidation-reduction reaction correspondingly. This produces the electric current. The current is directly proportional to the concentration of alcohol and following the Faraday’s law. Through measure the current to get the concentration of alcohol.
Feature:
* Small size
* High accuracy
* High sensitivity
* Linear output
* Long life
* Good anti-interference ability
* Excellent repeatability and stability
Application:
Residential and commercial
Alcohol testing for traffic safety
Alcohol testing before works
Coin-operated alcohol detector
Technical Parameters :
Item | Specification |
Target Gas | Alcohol(CH3CH2OH) |
Measurement Range | (0~1.0) mg/L |
Maximum Overload | 2.0 mg/L |
Sensitivity | (6±2)µA/(mg/L) |
Response Time(T90) | ≤20 Seconds |
Recommended Load Resistor | 10Ω |
Repeatability | ±0.006mg/L |
Stability | <2﹪/month |
Output Linearity | Linear |
Drift in Air(-20℃~40℃) | -0.01mV~0.01mV |
Lifetime | 2 years |
Operating Temperature Range | -20 ~ 50˚c |
Storage Temperature Range | 0~20℃ |
Operating Humidity Range | 15 ~ 90% RH |
Operating Pressure Range | 0.1MPa±10% |
Bias Voltage | Not required |
Note: All measurements were taken at 20˚C, 50%RH at 1013hPa |